Hightlight:
-Super Cardioid Polar Pattern
-Integrated Shock-Mount
-High Pass Filter (150Hz), High Frequency Boost (+6dB), and Three-position level control (-10dB, 0dB, +20dB)
-All-aluminum Construction
-Powered by 2 “AA” Batteries (not included)

The Vmic is a broadcast quality condenser microphone that provides professional audio for DSLR cameras and camcorders. The Vmic allows you to adjust your level control (-10dB, 0dB, +20dB), high-pass filter(150 Hz), and high-frequency boost(+6dB) – giving you the flexibility to capture audio in a wide range of environments.

The detachable 3.5mm cable connects the Vmic to the audio input of the camera, while the stereo headphone output allows you to monitor the incoming audio. The shock mount system provides isolation from vibration and mechanical noise.

Features:
-Super-cardioid polar pattern
-Integrated shock mount system
-High pass filter (150 Hz)
-High frequency boost (+6dB)
-Three position level control (-10dB, 0dB, +20dB)
-Headphone monitor output
-1/8 audio output jack to camera
-LED power on/low battery indicator
-Wind shield included
-Lightweight all-mental construction
-Increases Audio Sensitivity & Clarity

Specifications:
-Type: Condenser Microphone (Unidirectional)
-Polar Pattern: Super-cardioid
-Frequency Response: 35-20 kHz
-Sensitivity: -40dB +/- 1 dB / 0dB=1V/Pa, 1kHz
-Signal to Noise Ratio: 75dB or more
-Output Impedance: 200 Ohm or less
-Plug: Mini-pin plug (35 mm)
-Filter: High-pass filter (150 Hz)
-Battery: Two AA batteries
-Dimensions & Weight: 255 x 66 x 80 mm. 196 grams (6.9 oz)

The post Saramonic Vmic Super Cardioid Shotgun Video Microphone for Camera appeared first on Matrix Camera | Toko Kamera Dan Aksesoris Kamera Online Jakarta.

The Saramonic SR-PMIC1 is a compact and lightweight on-camera shotgun microphone that delivers broadcast-quality sound to DSLRs, mirrorless cameras, video cameras and audio recorders. It operates without any batteries or charging and provides truly useful features. The short output cable is removable, which can be useful for storage, but it also means you can connect any readily available 1/8“ (3.5mm) cable if you need more length. The output jack is on the top of the PMIC1, which saves space behind the microphone.

A low-cut switch on the back of the PMIC1 eliminates deep bass sounds. Footsteps sometimes produce distracting low rumbles that you can only hear when you watch your footage on a system with a subwoofer. This switch prevents you from recording these sounds. Low-cut will also tame the hum of air conditioner noise and make speech more intelligible — so consider using it every time you shoot.

The PMIC1 will likely be the easiest-to-use piece of gear you own. To use it you just fasten it to the shoe of your camera with its built-in mount and connect the included cable to the mic input on your camera. There is no power switch or button to worry about. You’re ready to shoot. The built-in camera shoe features a metal 1/4 20 tripod thread for more mounting options. This microphone sounds great, it’s durably built and ready to travel.

Please note that the PMIC1 requires “Plug-In Power” to operate. The vast majority of cameras provide it, but it is omitted on a few models.

-Broadcast-quality compact and lightweight on-camera shotgun microphone with plug-and-play battery-free operation
-Low-cut switch makes dialog more intelligible and eliminates distracting rumble sounds
-Output cable is removable, top-exit output jack is space efficient when mounted on top of your camera
-Robust integrated shockmount isolates mic from vibration noises and is not flimsy and prone to bending and damage
-Built-in camera shoe mount features a metal 1/4 20 tripod thread for more mounting options, durably built and ready to travel

The post Saramonic SR-PMIC1 Cardioid Unidirectional Mono Condenser Microphone appeared first on Matrix Camera | Toko Kamera Dan Aksesoris Kamera Online Jakarta.