Instead of using a hardwired controller, the 47″ Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera’s balance.

Additional Features
-1/4″-20 and 3/8″-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
-1/4″-20 and 3/8″-16 tripod mount threads on the bottom
-The slider can traverse the 47″ sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
-In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
-Companion mobile app downloadable for free for iOS and Android

Spesification:
-Sliding System: Belt-Driven Sliding System
-Load Capacity: 11 lb / 5.0 kg (Horizontal)
-Travel Distance: 47″ / 119.4 cm
-Tripod Mounting: 1/4″-20 Female Thread
3/8″-16 Female Thread
-Material: Carbon Fiber
-Camera Mounting Screw: 1/4″-20 Male & 3/8″-16 with Bushing
-Track Length: 48″ / 121.9 cm, Including Legs
-Weight: 10.1 lb / 4.6 kg

Package Include:
1x Camera Slider (47″)
1x Ball Head
1x L-Series NP-F750 Battery
1x Battery Charger
6x Camera Control Cable
1x Extension Cable
1x Carry Bag

The post GVM SLIDER-120 Wireless Carbon Fiber Motorized Camera Slider Parallax appeared first on Matrix Camera | Toko Kamera Dan Aksesoris Kamera Online Jakarta.

Instead of using a hardwired controller, the 31″ Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera’s balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots

Additional Features
-The slider can traverse the 32″ sliding range in a minimum time of 11.4 seconds to a maximum of 123 seconds in video mode
-In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at the slowest
-Companion mobile app downloadable for free for iOS and Android

Spesification:
Sliding System: Belt-Driven Sliding System
Load Capacity: 11 lb / 5.0 kg (Horizontal)
Travel Distance: 31″ / 78.7 cm
Tripod Mounting: 1/4″-20 Female Thread
3/8″-16 Female Thread
Material: Carbon Fiber
Camera Mounting Screw: 1/4″-20 Male & 3/8″-16 with Bushing
Wireless Connectivity: Bluetooth
Track Length: 31.5″ / 80.0 cm, Including Legs

Pakcage Include:
1x GVM Wireless Carbon Fiber Motorized Camera Slider (31″)
1x Ball Head
1x L-Series NP-F750 Battery
1x Battery Charger
6x Camera Control Cable
1x Extension Cable
1x Carry Case

The post GVM SLIDER-80 Wireless Carbon Fiber Motorized Camera Slider Parallax appeared first on Matrix Camera | Toko Kamera Dan Aksesoris Kamera Online Jakarta.